Composants
Compnents
The efficiency of Replicator work cells is made possible thanks to all the components and technological peripherals that make up their environment.
PRESENCE SENSORS
Presence sensors are used when the robotic cell operates with a conveyor. They allow the controller to detect when a part is present, stop the conveyor, and begin robot operations.
The presence sensors are connected to the controller and are pre-wired and pre-programmed upon delivery.
ENCODER
When integrated with a conveyor, it is possible to synchronize Replicator’s movements with the conveyor’s forward speed.
There is no need to stop the conveyor before starting a recipe.
An encoder installed on the conveyor reads its travel speed and adjusts the execution of the part processing accordingly.
The encoder is used together with a sensor that detects the presence of a part on the moving conveyor.
The recipe recording must be performed when the part is stationary.
ROBOT CONTROLLER
Each cell comes equipped with an industrial or collaborative robot and its power cabinet.
Every controller is equipped with mounting brackets, allowing installation in the desired location based on available workspace and configuration.
For ATEX and EX environments, longer cables are provided so the control cabinet can be located outside the hazardous zone.
REPLICATOR CONTROLLER
An electrical box mounted on the robot controller allows the connection of different devices:
- Positioning emitters
- Remote control
- Screens
All connections are easy to make thanks to clearly labeled connectors.
Except for the main power connection — which must be made by a certified electrician — no specific skills are required to connect the robot to the control cabinet and other peripherals.
INDEXING TABLE CONTROLLER
The control box required to operate indexing tables is pre-installed and pre-wired with the other electrical cabinets in the cell.
At installation, only two connectors need to be attached to the indexing table.
CONTROL BOX
Each Replicator robotic cell is designed for maximum ease of use.
All control buttons are grouped into a single panel for all essential cell functions, such as:
- 90° incremental indexing table control
- Indication that the part is correctly placed on the table and ready to be processed
HANDHELD CONTROLLER
A handheld controller comes with every cell. It allows the user to:
- Select the desired recording mode (Track or Teach)
- Start recording the required movements
- Calibrate the saved recipe
- Validate the quality of the saved recipe
- Ensure no mechanical interference with the robot
SPATIAL EMITTERS AND SENSOR
The Replicator system includes two emitters and a sensor used to spatially record movements.
The emitters are installed directly on the main base of the cell or on support mounts at a distance.
They must be positioned at least 0.5 m from the sensor and no more than 7 m away.
The emitters are housed in a rugged articulated enclosure that allows alignment toward the workstation.
For ATEX and EX environments, the emitters are placed inside an enclosure whose panel can be manually opened to expose them during movement recording.
Before starting the program, the operator must ensure the emitter panels are closed.
For added safety, the emitters’ electrical power is automatically shut off when the robot is in motion.
CHARGING STATION
To ensure the sensor is always ready for use and avoid production downtime, a charging station is provided to store the sensor when the cell is operating.
This charging station can be installed outside the robot cell to protect it from dirt and dust.
CALIBRATION STATION
For maximum precision during each recorded operation recipe, the sensor must be calibrated before every recording.
This essential step only takes a few seconds: simply place the tracker on its calibration plate and press the calibration button on the control screen.
The calibration base is installed and programmed at the factory, but its position can easily be changed and recalibrated if needed.
WORK SCREEN
The touchscreen provides access to the system’s main control interface.
It is used to perform and launch recordings and adjust all parameters when necessary.