Operating modes

The operating modes of the Replicator

Depending on the task to be automated, it is possible to choose between different ways of capturing tool movements, using either Track mode or Teach mode.

TRACK mode — visualize robot movements in real time

Track is a recording method in which the robot follows the operator’s hand movements in real time.
This method is ideal for individuals who are new to robotics. When you move the tool, you can clearly see how your hand movements are translated into robotic movements.

For an intuitive tracking experience, make sure the handle is aligned with the robot tool; otherwise, the movements may appear misaligned.

Ease of Use

  • Before starting the recording, move the robot to its starting position.
    To do so, press and hold the Move button and guide the robot into place.
  • To begin recording, press the Record button in the interface and demonstrate the task.
    When finished, press the Record button again.
  • To preview the recording, press Play or use the Forward and Reverse buttons.

The robot now knows which tasks to perform and will repeat all movements exactly as taught.

TEACH mode — teach movements to be repeated

Teach is a recording method where hand movements are demonstrated while the robot remains still.
Once you finish, the robot repeats your movements in the same way.
This method may be preferred if you don’t want to think about how the robot will move, and instead wish to focus solely on the task itself.

The TEACH method requires certain preparations, such as configuring the reference frame.

The reference frame is created using the reference plate. When using Teach, the trajectory is recorded relative to the reference plate. When executing the trajectory, Play mode or Tune mode is performed relative to the reference plate. The reference frame is the position of the reference plate in relation to the robot base.

Calibrating a teaching frame

To calibrate a teaching frame (specific to the IR Tracker):

  • Position the reference plate near the part to be processed
  • Place the Tracker into the reference plate
  • Ensure the Tracker is visible to the lighthouse
  • Press “Align Tracker”

To record

  • Place the handle in the starting position.
    It is recommended to begin slightly away from the desired path in order to capture the approach in the recording.
  • Click the Record button once to start recording
  • Move the handle to trace the path
  • Place the handle at the stopping position
  • Click the Record button again to stop recording

Executing the recording at different locations

It is possible to specify different reference positions to execute the recording. The recording will be performed relative to the reference frame. Therefore, selecting a different reference frame will change where the recording is executed.

No need to be a programmer to use the Replicator!
Just follow a few guidelines and you’ll be highly productive.

When teaching the robot movements with the tool, anticipate any obstacles the robot will need to avoid by considering the robot’s axes of motion.

Example:
For sanding the inside of a four-legged chair, a collaborative worktable cell with an indexer is ideal. Sand only one side at a time. Index the table so that the robot does not have to pass through the inside of the chair, preventing it from hitting one of its legs.

When recording movements for the robot, make sure not to exceed the robot’s extension limits.
If this limit is exceeded, the robot will trigger an alarm during program execution and you will need to perform a manual reset.

To ensure accurate reproduction of movements by the Replicator on subsequent parts, it is important that they be positioned identically to the original workpiece.
If not, the robot will not be able to automatically adjust its trajectory and will perform the movements exactly as recorded on the original part.
Incorrect positioning may also cause interference with the robot’s motion, potentially damaging the equipment.

Need a bit of training to feel comfortable with your Replicator?

No problem—contact our team of professionals, who will support you in implementing your solution. You’ll quickly gain full mastery of the different operating modes.